Drawing Revisions and PDMWorks (Part 2: Automatic Revisions)

With PDMWorks, it is possible to automatically revise a drawing’s title block and revision block upon check in.  Three things are necessary to use this functionality.  First, the drawing template will need to employ a SolidWorks Revision Table.  If someone is not familiar with how to set up revision tables, please see my previous article: Settings Up and Using SolidWorks Revision Tables faster. Second, the drawing template’s title block will need an annotation note that is linked to the custom property “Revision”.  If someone is not familiar with how to link annotation notes to custom properties, please see my previous articles about this subject:Introduction to SolidWorks Custom Properties.  Third activate the revision automation feature within the PDMWork’s VaultAdmin tool.  Of course, this will require Vault Administrator access to the VaultAdmin. The setting is found under the Revision Table tab in the General section, called “Enable Revision Table”.

Once these three items are set up, drawings will automatically revise upon check in, with updated revision and title blocks.  Control over what appears in the added revision row is within the check-in screen itself when the drawing is checked in.  Further controls can be set up to limit or automate the value for revisions so that no mistakes can be made regarding the revision level of the check-in.  Within the VaultAdmin, there is even the ability to control the number of revisions visible on a drawing.  Utilizing this set up can save substantial time and eliminate potential check-in revision identification errors.

Author: fcsuper

As a drafter, mechanical designer and CAD engineer, I've been in the mechanical design field since 1991. For the first 8 years of my career, I was an AutoCAD professional. I utilized AutoLISP and many other AutoCAD customization features to streamline drafting activities for 6+ drafters and designers. I authored several custom functions, one of which was published in the March 1997 issue of Cadalyst Magazine. Since 1998, I've been used SolidWorks non-stop. I've worked to utilize the SolidWorks' user environment to simplify drafting and design activities for 20+ engineers. I've created this website to provide current information about SolidWorks from a variety of contributors. More recently, I am now employed by Dassault Systemes as SOLIDWORKS Sr. Product Definition Manager to improve drawing, annotation and MBD related areas.

5 thoughts on “Drawing Revisions and PDMWorks (Part 2: Automatic Revisions)”

  3. I am producing a pack of drawings for production. On one drawing, the icons and commands are grey. The drawing will not allow me to do anything to it. I have shut down SW and closed the drawing in an effort to make it work. Any suggestions?

  4. Make sure you are not editing the sheet format. Other than that, there might be something active to which you are not aware. However, without more detail about what’s going on, I’d have a hard time trying to guess. If you don’t resolve this issue, try submitting your question in the SolidWorks Forums: http://forum.solidworks.com with a screen shot.

  5. “Second, the drawing template’s title block will need an annotation note that is linked to the custom property “Revision”.”
    no problem creating a custom propert, or linking text to it, but where and what is this annotation?

Leave a Reply

Your email address will not be published. Required fields are marked *