Facebook coming to SolidWorks Legion

Linking a blog to Facebook isn’t as easy as linking it to Twitter.  That’s why I haven’t done it up to this point, even though there’s been a page for SolidWorks Legion on Facebook for a couple of years.  Today, I finally did it.  With the publishing of this very post that you are reading right now, I’m testing the success (or failure) of my efforts.  If you are reading this sentence on Facebook (and seeing the SolidWorks Legion logo within the wall posting, as well) then I succeeded. 🙂   Here we go… One.. Two… Three..

Link to SolidWorks Legion Facebook page

SolidWorks World 2012 – submit Abstract for your presentation idea

If you feel that you have a good information to share about a particular SolidWorks related topic, then perhaps it is time to consider giving a presentation at SolidWorks World 2012.  The perk for presenters is that you get a free Full Conference Pass (saves you just under a $1000 or so).   Your presentation idea doesn’t have to be a topic that is specifically about SolidWorks products.  It may be that you can talk about something that can help SolidWorks users in a particular area of their role within their company.  For example, I gave a well received presentation at SolidWorks World 2011 on Establishing CAD standards within a SolidWorks environment (also, see the article My road to becoming a presenter at SolidWorks World).  I’m certainly not the most polished speaker in the world, country, state, county, town or even on my block.  You don’t have to be great at public speaking (though it may help).  As long as you know your material, attendees will appreciate learning from your time and effort.

Although all topics will be equally considered, there is a special interest in Drawing presentations this year.  If you have good information to share about general tips and tricks, templates/sheet formats, using drawings in PDM, drawings basics, leveraging model data, ISO and ASME standards, etc, the SolidWorks team would love to see your submission for a presentation!  For example, at SolidWorks World 2011, there was an excellent presentation on the ASME Y14.5 drafting standard.

Of course, there are many other topics to cover! 

  • CAD Administration
  • Data Management
  • Design Automation
  • Design Communication
  • Design Validation
  • Education
  • Modeling Essentials
  • Productivity Tools
  • Customer Success
  •  

    In fact, customer success presentations are great because they usually provide real world examples of how SolidWorks functionality was leveraged to speed up their design process.  These can be useful to other users and companies, often in other industries!

    If you are not interested in being a presenter, the excellent variety of presentations at SolidWorks World is a great way to expand your knowledge and connect with others in industry.

        

    A Candidates’ Market Emerges, or Maybe It Always Has Been

    Article by Rob Romaine, president of MRINetwork.  Republished with permission of The Chatham Group, an MRI company.  The statements expressed in this article are those of the original author and do not necessarily reflect the opinion of SolidWorks Legion or its authors.

    No one seems to question the connection between unemployment, the employment market, and the economy. They are often used almost interchangeably. Yet, the three are different, and right now, they are in disparate places.

    May saw a significant slowdown in the number of jobs being added to the workforce as the declines in the unemployment rate, which began early this year, came to a halt. The general economy, which a few months earlier had been showing signs of growing faster than expected, has failed to impress. The talent market, however, is such a different story that it seems counterintuitive.

    In a recent survey of MRINetwork recruiters, more than half (54 percent) characterized the current market as candidate-driven. In fact, 52 percent of respondents noted an increase in the number and competitiveness of counteroffers in the last six months.

    “Successful companies are frugal. They don’t throw money around just because they can and when they do begin making counteroffers, especially the kind we’ve seen recently, there is a reason for it,” says Rob Romaine, president of MRINetwork. “Employers who have had to conduct major searches over the last year understand better than anyone the cost and difficulty associated with finding top candidates today. When top talent resigns, employers are finding it easier to counteroffer, even if it falls outside their traditional pay grade for a role.”

    In the survey, recruiters noted companies that never use counteroffers or even have explicit policies against them are making offers. Some are just monetary-recruiters report seeing as much as a 40-percent increase in base pay-while others focus on non-monetary issues.

    “Compensation always plays a role when talent changes positions. But the last few years have been hard on corporate cultures as cost-cutting measures have trimmed back many, if not most, of the perks that defined great workplaces a decade ago,” says Romaine. “Not only is improving the workplace environment important for retention but also for recruitment. If a candidate sees a drab, low energy office in an interview, it’s going to take a substantially larger offer to lure them away than a bright and active office.”

    What turns the act of recruiting from a science into an art form is the ability to nurture that sense of attraction and excitement for a position that will entice a great employee with a steady job to resign and take a new opportunity. If the hiring process is drawn out, that excitement will wane.

    “On average, we are seeing employers take more than five weeks from a candidate’s first interview until an offer is made,” says Romaine. “After more than a month, what started as an exciting opportunity becomes a nerve-wracking process that has thrown the candidate’s future into limbo.”

    Companies should not be fooled by a cool economy or a stubbornly high unemployment rate into thinking that it is an employer’s market.

    “At the same time, when push comes to shove, for top talent, it always is a candidate-driven market,” notes Romaine. “Today we are seeing a tighter market for top talent than perhaps is typical. But in truth, top performers are sought after regardless of the economic cycle.”

    Bertrand Sicot fails his test (but then passed on the second try)

    Bertrand Sicot, new CEO of DS SolidWorks Corp is undergoing the three stages of the Certified SolidWorks Professional test.  He passed the first stage on his first try, but failed the second stage.  He had to retake that portion of the test.  If you haven’t yet seen his most recent article on his journey to being a CSWP, please check it out on the SolidWorks Blog.  I look forward to getting the news of how well he did on the last stage of the test, so that he will also be able to add those four letters C-S-W-P to his name.

    Controlling how flag notes are attached to leaders (part 1)

    This entry is part 1 of 2 in the series Controlling how flag notes are attached to leaders

    SolidWorks provides the ability to support many different shapes for flag notes.  In addition to shapes, there are several methods in SolidWorks to create flag notes on a drawing.  Each method gives a slightly different result in how the flag note symbol looks and how it is attached to the leader line.  Part 1 of this article will cover shapes and the flag note symbols.

    Flag note symbol shapes

    There are two general methods to add flag note symbols to an Annotation Note.

    The first (and older) method is to use the symbol library.  There are literally hundreds of symbols included within the library.  The library supports triangle, square and circle symbols for numbers and letters, with or without the period.  This method inserts a tag into the Annotation Note, which then generates the flag note symbol, based on existing data in the gtol.sym file.

    Using the Flag note symbols from the symbol library

    To use this method, create the Annotation Note with a leader.

    While in the edit mode, click on the Add Symbol button in the PropertyManager.

    This opens up the Symbol Library.  Pick the appropriate flag note symbol and OK.This opens up the Symbol Library. Pick the appropriate flag note symbol and OK.

    This will insert the symbol into the Annotation Note.

    If the triangle is chosen, the resultant symbol is not an equilateral triangle. The square and circle symbols are truly squares and circles, respectively.  Note the gap between the flag note and leader.  This gap can get bigger or be completely removed with a different method, which I will go into in part 2 of this article.