Top Ten Enhancement Requests for SolidWorks World 2010

As with each year, SolidWorks World lists the top ten enhancement requests as choosen by SolidWorks users.

#10 Simplify Video Card Requirements – I’m not sure I entirely understand the scope of this request.

#9 Exploded Views for Weldments – Cool.

#8 Option to Dangle Children Instead of Deleting – This should be much higher on the list, in my opinion.

#7 Graphical Map of Reference – Ok, sure.

#6 Allow More Types of Assembly Features – Cool.

#5 Better Utilization of Processore Cores – Yes, definately.  SolidWorks is years behind the curve.

#4 On The Fly Equations in Dialog Boxes – Yes!!!

#3 File Compatibility Between Versions – YES!!!

#2 Increase Stabilty – Yes, but what does this really mean?

#1 SoldWorks Should Cleanly Uninstall Itself – I agree with this too, but is this really something that affects a lot of people on a daily basis?

Enhancements planned for SolidWorks 2011

There were a lot of new SolidWorks 2011 functionalities that were demonstrated in today’s general session.  There’s a long list of improvements.  SolidWorks presented most of these improvements as part of an on-stage skit, so it was difficult to keep track of all the discussed changes.  However, this is my best attempt to give a nearly complete list:

Parts

  • Revolve will be extrudable “up to surface”
  • Defeature feature allows for the removal of internal features of a part to protect IP.
  • Real View is “fully customizable”
  • Display Manage that controls settings such as color, transparency, etc.
  • Photoview 360 now has a preview menu within SolidWorks Works
  • Animation can be pre-rendered
  • Further improvements have been made to memory usage and optimization
  • Within Non-linear simulation, planar simulation allows the user to run simulation on a 2D slice of a part to save time; also, that 2D slice can be projected back to the 3D part.
  • Feature lock!

 Drawings

  • Dimensions spaced evenly and in the right view (on new views, or to correct existing views)
  • Thumb wheel to change spacing of dimensions
  • Dual dimensions allowed in hole table
  • Weld tables now available in drawings
  • Weld callouts can be automatically added to a drawing

Assemblies

  • Chamfers and fillets can be used for weld prep
  • Cut sweep allowed
  • Weld gaps with actual geometry
  • Walk thru function, just like video games
  • Multiple piping enhancements

James Cameron Press Conference

Using the word “press conference” is often a sure way to scare readers away.  I hope that doesn’t happen now.  There’s nothing boring about James Cameron (as far as I can tell).  He can discuss a range of topics, using simple terms peppered with “big words”.  He can seamlessly use the words “buttload” “proxy resolution” while discussing the same thought.  Cameron describes himself as someone who tries to evolve himself outside of the Hollywood culture.  Instead he opts for other areas, such as what he calls the “NASA culture”. 

He promoted large displays.  According to Cameron, 7 million large screen TVs were sold in 2009, and are slated to double this year.  When it comes to stereoscopic technology (3D movies), the display is “racing ahead of content.”   There needs to be a lot more movies such as Avatar.   International soccer is already embracing the new technology by recently showing their games in 3D.

When asked why he was working on a camera to be sent to Mars, yet he will be going to the bottom of the Marianas Trench himself, Cameron stated that it is easier to control a robot on Mars than 7 miles down on the ocean floor.  He also stated, “I believe in the physical present of the observer” and that controlling robots are “not as much fun” as being their in person.

When discussing the origin of the creators in Avatar, Cameron alluded to some mythical inspiration, but that the 10 foot tall blue characters were actually based on a dream his mother had once.  Jokingly, Cameron said that he told his mother he would make a movie about them someday.

When asked about his environmental message, he did iterate, “people need to be inspired to go into the environmental sector” to make our civilization better.  Technology is causing many of our problems and we will need to think and design our way out of those problems.

Breakout Session 2010 – 10 CAD Administration Tips

At Matt Lombard’s 10 CAD Administration Tips breakout session, he covered ten things to consider when administrating SolidWorks.

– Unique file names. Don’t use “block”, “base”, etc as file names. One thing of interest that he highlighted was the fact that when opening a file, SolidWorks looks in 12 places before it looks in the place you last saved it.

– Think about a revision scheme. Don’t save the revision in the file name and don’t use configurations for revisions.

– Select good hardware. Don’t go too cheap, but also don’t just buy what is expensive. Research hardware to find what best suits your needs.

– Clean installs of SolidWorks to reduce the chance of legacy settings affecting your install.

– System Maintenance.

– Reuse and share data.

– Establish standards and best practices. Modelling practices should be tailored to a specific group of users.

– Proper and complete training of users.

– Upgrade/update plan.

– Toolbox (no strong recommendations as to using it or not).

Selection of James Cameron as SolidWorks World guest speaker

James Cameron was so impressed with Infinite Z (brought up during the first presentation of the General Session) he requested to see their booth right after the end of the General Session. This meant that the press was kept waiting for awhile at the press conference in his honor. Jeff Ray and Jon Hirshtick entertained the press with a pre-press conference of sorts.

They discussed the selection process in choosing guest speakers for SolidWorks World. Ray stated that they look for people that are both entertaining and relevant. Ray also stated that they want someone that goes beyond just saying they like and use the product. Hirshtick stated that they do not prep guest speakers to say good things or not to say bad things about SolidWorks.

When they were first considering Cameron, the release of Avatar was still off in the future and not widely known.  There was concern about how relevant a Hollywood type would be to the core 3D CAD audience. After looking up his wikipedia article, Hirshtick was excited about this former machinist, inventor and innovator in working with cameras.

Cameron’s cool statements about 3D printing and CAD during his presentation where not planned. As mentioned previously, he stated that the bulldozers shown in the movie would have been 3D printed in the storyline.

The press conference will be covered in an article later today.