Hiller Aviation Museum

Flying bears!As mentioned in a previous article, I recently had a chance to visit the Hiller Aviation Museum.  It’s an interesting place.  The museum is housed within a former industrial building.

In the main entrance hall, the visitor can view a sizable restoration shop with its menagerie of old equipment and tools.  The shop is bigger than some machine shops.  There are also many scaled airplane models dangling from the ceiling.  Let’s not forget the rather sizable souvenir shop.  As I mentioned before, I bought the t-shirt. 🙂

The main viewing room is the entire right side of the building.  It houses many full scale and scaled air machines, with some original airplanes mixed with replicas.  Where there’s space to fill, you’ll find an airplane or parts thereof.

AvitorOne of the more interesting facts promoted at this museum is that there where successful attempts at powered flight long before the Wright Brothers. The Herman Avitor Jr. (or just Avitor) was powered by a 1-hp steam engine that drove twin propellers.  It was was the first successfully flown heavier-than-air aircraft to employ a three-axis control system.  It was built in San Francisco, CA.  In 1869 it took flight near the modern day SF Int’l Airport.  Sometime after its first flight, the contraption was destroyed when it caught fire.

Pepsi SkywriterAnother interesting exhibit was the Pepsi Skywriter, used by Pepsi to promote their product for a few decades starting in the late 1920’s.  I’m not sure if this is a replica, but it is interesting to see the old Pepsi logo and figure how long ago companies where using inventive new marketing techniques to promote their products.

Staying Connected to all things SWW10

Connect to the SolidWorks Community

There’s already a lot of buzz being built about SolidWorks World 2010 (SWW10), even with it being months away.  To help readers keep track of the goings-on, SoildWorks website has a pipe that feeds articles from many of the SolidWorks related blogs.  Not every article fed into the pipe is going to be about SolidWorks World 2010 right now, but a lot of them are about it already (such as the article you are reading right now).

Additionally, on that same webpage resides a Twitter fed pipe for all tweets labelled with the hatch #SWW10 or #SWW2010.  Since the SolidWorks World 2010 hatch is used, it’s a sure bet that the tweets fed into the pipe are about SWW10 in some fashion or another.  There aren’t many tweets just yet, but as we get closer to the conference, this will change drastically as more comments and planning are discussed.

In addition to this, I’ve set up the Twitter pipe on SolidWorks Legion, which will remain visible in the upper right menu until some time after SWW10 concludes in January 2010.  *Update, I’ve removed the Twitter feed from my sidebar due to slow load times.  Please see my Twitter feed page.*

SolidWorks 2010: Mouse Gestures

SolidWorks Corp has been working hard to improve the user experience.  SolidWorks 2010 has examples have several innovative interface additions.  The one addition that is sure to get a lot of attention is Mouse Gestures.

Mouse Gestures is a simple a menu scheme that is controlled by the RMB and a gesture (or short movement) of the mouse.  When the RMB is clicked and held briefly in addition to a very slight movement of the mouse, a wheel menu appears around the cursor location.

Mouse Gesture Menu

Simply continue to hold the RMB down and move the cursor over the desired command.  Without any further action, that command will execute and the menu wheel will disappear.  If the RMB is released before a selection is made, the menu wheel is cancelled without any command executed.

If the traditional RMB is desired instead of the menu wheel, simply give the RMB a quick click (same as it ever was) without a mouse movement.

As with the “S” key shortcut menu scheme, Mouse Gestures menu wheel is customizable and context sensitive.  The user is allowed 4 or 8 gestures with four different menus for each of the major modes: Part, Assembly, Drawing and Sketch.  These are customized under a new tab in the good ol’ Tools>Customize… window.

Here are the eight gesture choices that can be assigned to particular commands:

Gestures

Mouse Gestures is suprizingly easy to use.  It’s intuitive when it is activated intentionally.  However, I have found myself activating it unintentionally once in awhile.  This may result in the surprize command being executed before I even know what hit me.  So, for now and for me, Mouse Gesturing will be limited to View Modify functions.  I certainly won’t be placing the Quit in my menu wheel.  That said, the usual result of the accidental activation is just that the user will see the menu wheel briefly ghost in and out before any command is executed.

Mouse Gestures is a great new tool that looks to be a major time saver for frequently used commands.  I’m looking forward to having a bit of fun playing with Mouse Gestures and customizing its functions until I find just the right combination of commands for each mode.

SolidWorks World 2010: Call for Papers

Call for white papers,white papers,sww10,SolidWorks World,SolidWorks World 2010

SolidWorks World wouldn’t be the same without the Breakout Sessions and their presenters. Each year, there is a call for papers.  T his is where anyone with experience in a particular topic can propose a presentation as a speaker.  N ot everyone who submits a paper will have their presentation accepted.  H owever, you never know.

Topics of interest this year are as follows:

    CAD Administration
    Data Management

  • Team Data Management
  • Enterprise Data Management
  • Personal File Management
    Design Automation

  • General
  • API
  • Design Tables
    Design Communication

  • General
  • eDrawings
  • Rendering
  • Animations
  • 3DVIA Composer
    Design Validation

  • General
  • Mechatronics
  • Structural Analysis
  • Flow Analysis
  • Advanced Analysis
  • Tolerance Analysis
  • Sustainability
    Education
    Modeling Essentials

  • General
  • Managing Large Assemblies
  • Mold/Tool/Die
  • Sheetmetal
  • Surfacing
  • Sketching
  • Weldments
  • Working with SolidWorks Drawings
  • Mechanism Design
    Productivity Tools

  • General
  • Routing, Piping, Harnessing
  • ECAD to MCAD
  • Hardware and 3D Content
  • Data Translation
  • Design Standards
    Customer Success/Designing Better Products

Two types of speaking opportunities exist:

  • Breakout Session speakers (for sessions that last from 60 to 90 minutes) – must have experience presenting technical information effectively, providing interesting, original, and informative content.
  • Hands-On Breakout Sessions (for sessions that last from 60 to 90 minutes) – Hands-On sessions entail presenting to no more than a maximum of 30 attendees who will each have use of their own computer. Hands-On simply means that attendees will have the ability to follow along and actually “do” what the presenter does, so they have a “hands-on” experience in the session. The presenter must have experience presenting technical information effectively, providing interesting, original and informative content. Hands-on sessions require a second speaker to act as a guide to keep the class up-to-speed with the pace.
  • SolidWorks Labs

    One of the more fascinating groups at SolidWorks Corp is SolidWorks Labs. The R&D members in this group really have no central location from which they operate.  Thy work by taking tons of input from many different sources and funnelling these into their group for development.  Tere are some of their current projects, available for download on their website:

    icon

    Tagger – Harness the hidden power of one of CAD’s most overlooked capabilities, tags. With this add-in you can quickly visualize all tags used in open documents, easily modify the tags and create favorite tags for reuse.

    icon

    Treehouse – Scope out your next SolidWorks project with this easy-to-use application. Drag and drop SolidWorks templates to create a visual tree that can be exported to actual SolidWorks documents.

    icon

    BluePrint Now – Why should you be anchored to your “CAD system” to make drawings? Come step into the future with web-based drafting!

    icon

    Gallery Widget – Show off all of your SolidWorks designs with this slideshow widget. Select of folder, select a custom picture frame and watch your designs come to life right on your desktop.

    icon

    Drawings Now – Have you ever wanted to access drawings without having to sit at your desk or download any software? How about easily share your designs with colleagues? Sounds like you need to try Drawings Now.