Socially speaking or speeches made social

SolidWorks World 2015SOLIDWORKS World 2015 isn’t just for Phoenix, AZ.  It’s really for the World!  The General Sessions of SOLIDWORKS World 2015 will be live streamed this year.  Even if you aren’t able to make it to Arizona next week, you can be a part of the action via the live streaming.   As you know, the keynote speakers for each day were announced earlier this year.  General Sessions are 8:30 to 10AM each day (local Arizona time).

Registration for each day is required, but it is free and you can watch it from anywhere with an Internet connection.

Bonus videos are already available.

 

 

Pictures and Video at SOLIDWORKS World 2015 General Session

SolidWorks World 2015It’s fun to take photos and video during the SOLIDWORKS World General Sessions, particularly if your favorite keynote speaker is doing something really awesome on stage or robots are flying over the audience.  There was a rule that attendees are not allowed to take video (and sometimes photos) of General Sessions.  Something is different this year.

Clipart of CameraThis year’s General Sessions will be even greater social media events than in years past.  This is really saying something since past General Sessions have already been powerful social media events.  (In the early days of Twitter, the SOLIDWORKS World hashtag #SWW09 trended.)  For starters, taking and sharing photos and video via social media will not only be officially allowed, it is going to be encouraged.

What does this mean for attendees of SOLIDWORKS World 2015, as well as those who could not attend this year?  What other ways will social media be supported? More information will be forthcoming from official sources soon.

 

#SWW15 is already full of useful info for SOLIDWORKS WORLD 2015

The SOLIDWoRKS World hashtag is something that started way-back-when during the early days of Twitter.  You can still check the old tweets under #SWW09, which supposedly trended on Twitter during SolidWorks World 2009.  Many years later, many more services now support hashtagging.

SOLIDWORKS World 2015’s hashtag is #sww15, and it is already being filling up with useful information on Twitter and Google+. Check it out, and keep following them for the lastest!

#SWW15 on:

Power and Connectivity Strategy at SOLIDWORKS WORLD 2015

[UPDATE: 2/2/2015: Wifi will be available throughout the conference areas]

Keeping power hungry mobile and portable devices fed (charged) presents a unique challenge in the 21st Century.   This appearently was a real problem recently at the International CES 2015 in Las Vegas this year, according to some reports.

Keeping connected to the Internet also presents challenges.  There is a lot going on at SolidWorks World.  It is a big event with thousands of tech savvy attendees with tons of devices, competing with resources to keep them feed and connected.  Granted, keeping a smartphone charged is pretty dang cheap.  However, finding an electrical outlet is the issue at hand.

Power

Phoenix Convention CenterIf you are using your smartphone to keep your schedule (like I do), you’ll be accessing it more often than you might on a normal day.  In addition, you’ll likely be messaging (texting, FB messenging, etc.) and using other social media communication more frequently, too.  Normally, your smartphone’s battery charge may last a day or two without any worries.  No day at SolidWorks World is normal.  Even on the most battery efficient devices, you are likely to need power to recharge at some point during the day.

Have a spare battery or extended-life remote battery on hand, whether you are using a laptop, smartphone, tablet, or any combination thereof.   Wherever you happen to find yourself, be sure to scope out power outlets.  This applies while you are at the conference, and more so also after hours while you are out and about and when your device is most likely to be low on power.  (If you are spending extra time at an airport on stop-overs on your way to the conference, this can be particularly challenging.)

During the day, if you have a smartphone and a laptop, you can charge your phone from the laptop via the normal USB connection.  Finally, the most obvious thing of all, don’t forget any of the charging cables.

If you are plugged into a random outlet or loaning your charger temporarily to another attendee, don’t forget to grab your charging cable before taking off to your next destination!  If you forget it, you will likely never see it again, for various reasons.  This particularly applies to breakout session speakers who may get distracted at the end of their presentation by people rushing up to the podium to introduce themselves and ask further questions.  Am I speaking from personal experience?  Maybe.

Staying Connected

Staying connected is the whole reason we carry around smartphones and tablets.  That means you always need an awareness of WiFi hotspots.  Those of us with smartphones may not be tethered.  However, don’t rely on cellphone carrier signal for data connections while in a conference room.  Even smartphones on a free data plan may need to switch over to WiFi to access the Internet at some point to Facebook, Foursquare or Flickr.  Something new this year: SOLIDWORKS World will provide WiFi throughout the conference area.  In other words, the conference itself will be one gigantic hotspot.  One of the main locations will be near the Partner Pavilion.

All this means that you’ll need to scope out the locations of these hotspots a head of time so you aren’t left without data connection at an inconvenient moment.  Hotspots should be shown on the conference map.  Keep in mind that there will be many other people accessing WiFi at the same time, so please avoid downloading big files or streaming videos.  I always recommend hitting the hotspots for specific connectivity needs, then quickly moving on.

Good luck and I hope to see you at SolidWorks World 2015!

—–

The author of this article is an employee of Dassault Systemes.  However, the material of this article is not representative of Dassault Systemes, nor is it reviewed by them.  Please see the FTC notice in the right side bar of this webpage for further details.

Just over two week until SWW15

Configuring SOLIDWORKS Toolbox by John Van Engen – Gain the power of SOLIDWORKS Toolbox by adding your own custom holes, fasteners, and part numbers! Learn how to configure and customize SOLIDWORKS Hole Wizard and Toolbox.

SOLIDWORKS Simulation: Accelerating the Design Process by Arunachalam Thiraviam – Benefits of incorporating SOLIDWORKS simulation into the product design workflow. It is geared toward introducing new simulation users to the capabilities of the SOLIDWORKS Simulation Standard.

SOLIDWORKS API for Total Beginners by Keith Rice – This session will walk you through the creation of a powerful macro from scratch, and you’ll learn about the three foundational skills of SOLIDWORKS API programming and what resources can help you achieve proficiency.

SOLIDWORKS Plastics Hands-On Test Drive by Lotfi Derbal – Attendees will learn how to use SOLIDWORKS Plastics to optimize their plastics part and injection mold designs.

The World Is Still Flat: Everything You Need to Know About Drawing Views by Rachel Diane York – Drawings have many elements, the most important being Drawing Views. We will discuss and practice creating views to help users lay the proper foundation for beautiful drawings.