#SWW15 is already full of useful info for SOLIDWORKS WORLD 2015

The SOLIDWoRKS World hashtag is something that started way-back-when during the early days of Twitter.  You can still check the old tweets under #SWW09, which supposedly trended on Twitter during SolidWorks World 2009.  Many years later, many more services now support hashtagging.

SOLIDWORKS World 2015’s hashtag is #sww15, and it is already being filling up with useful information on Twitter and Google+. Check it out, and keep following them for the lastest!

#SWW15 on:

Power and Connectivity Strategy at SOLIDWORKS WORLD 2015

[UPDATE: 2/2/2015: Wifi will be available throughout the conference areas]

Keeping power hungry mobile and portable devices fed (charged) presents a unique challenge in the 21st Century.   This appearently was a real problem recently at the International CES 2015 in Las Vegas this year, according to some reports.

Keeping connected to the Internet also presents challenges.  There is a lot going on at SolidWorks World.  It is a big event with thousands of tech savvy attendees with tons of devices, competing with resources to keep them feed and connected.  Granted, keeping a smartphone charged is pretty dang cheap.  However, finding an electrical outlet is the issue at hand.

Power

Phoenix Convention CenterIf you are using your smartphone to keep your schedule (like I do), you’ll be accessing it more often than you might on a normal day.  In addition, you’ll likely be messaging (texting, FB messenging, etc.) and using other social media communication more frequently, too.  Normally, your smartphone’s battery charge may last a day or two without any worries.  No day at SolidWorks World is normal.  Even on the most battery efficient devices, you are likely to need power to recharge at some point during the day.

Have a spare battery or extended-life remote battery on hand, whether you are using a laptop, smartphone, tablet, or any combination thereof.   Wherever you happen to find yourself, be sure to scope out power outlets.  This applies while you are at the conference, and more so also after hours while you are out and about and when your device is most likely to be low on power.  (If you are spending extra time at an airport on stop-overs on your way to the conference, this can be particularly challenging.)

During the day, if you have a smartphone and a laptop, you can charge your phone from the laptop via the normal USB connection.  Finally, the most obvious thing of all, don’t forget any of the charging cables.

If you are plugged into a random outlet or loaning your charger temporarily to another attendee, don’t forget to grab your charging cable before taking off to your next destination!  If you forget it, you will likely never see it again, for various reasons.  This particularly applies to breakout session speakers who may get distracted at the end of their presentation by people rushing up to the podium to introduce themselves and ask further questions.  Am I speaking from personal experience?  Maybe.

Staying Connected

Staying connected is the whole reason we carry around smartphones and tablets.  That means you always need an awareness of WiFi hotspots.  Those of us with smartphones may not be tethered.  However, don’t rely on cellphone carrier signal for data connections while in a conference room.  Even smartphones on a free data plan may need to switch over to WiFi to access the Internet at some point to Facebook, Foursquare or Flickr.  Something new this year: SOLIDWORKS World will provide WiFi throughout the conference area.  In other words, the conference itself will be one gigantic hotspot.  One of the main locations will be near the Partner Pavilion.

All this means that you’ll need to scope out the locations of these hotspots a head of time so you aren’t left without data connection at an inconvenient moment.  Hotspots should be shown on the conference map.  Keep in mind that there will be many other people accessing WiFi at the same time, so please avoid downloading big files or streaming videos.  I always recommend hitting the hotspots for specific connectivity needs, then quickly moving on.

Good luck and I hope to see you at SolidWorks World 2015!

—–

The author of this article is an employee of Dassault Systemes.  However, the material of this article is not representative of Dassault Systemes, nor is it reviewed by them.  Please see the FTC notice in the right side bar of this webpage for further details.

Just over two week until SWW15

Configuring SOLIDWORKS Toolbox by John Van Engen – Gain the power of SOLIDWORKS Toolbox by adding your own custom holes, fasteners, and part numbers! Learn how to configure and customize SOLIDWORKS Hole Wizard and Toolbox.

SOLIDWORKS Simulation: Accelerating the Design Process by Arunachalam Thiraviam – Benefits of incorporating SOLIDWORKS simulation into the product design workflow. It is geared toward introducing new simulation users to the capabilities of the SOLIDWORKS Simulation Standard.

SOLIDWORKS API for Total Beginners by Keith Rice – This session will walk you through the creation of a powerful macro from scratch, and you’ll learn about the three foundational skills of SOLIDWORKS API programming and what resources can help you achieve proficiency.

SOLIDWORKS Plastics Hands-On Test Drive by Lotfi Derbal – Attendees will learn how to use SOLIDWORKS Plastics to optimize their plastics part and injection mold designs.

The World Is Still Flat: Everything You Need to Know About Drawing Views by Rachel Diane York – Drawings have many elements, the most important being Drawing Views. We will discuss and practice creating views to help users lay the proper foundation for beautiful drawings.

SOLIDWORKS Certification – CSWP to CSWE

This entry is part 5 of 5 in the series SOLIDWORKS Certification

I first earned my SolidWorks Professional certificate (CSWP) at SolidWorks World 2011.  Attendees of SolidWorks World are able take the CSWP exam if they specify such when they register for the conference.

Between SolidWorks World 2011 and 2012, I joined the DS SolidWorks Corp on the Product Definition team.  This is a busy job.  There was quite a stretch before I attempted any of the advanced certification exams.  There are several advanced exams, covering various areas of SolidWorks functionality.  You need to pass any four of the five CSWP advanced certificates in order to qualify to take the Certified SolidWorks Expert exam.

Chart of my certifications leading up to the CSWE

My path to earning my CSWE

As shown in the above chart, I took most of my advanced exams this year: Mold Tools, Surfacing and Weldment, after having the Drawings Tool certification for awhile.  I’m excited that I just earned my CSWE this week; a Christmas present to myself.  Just in time for SOLIDWORKS World 2015 and its secret CSWE event.  Jeff Mirisola wrote about his first CSWE event a couple years ago.  This year will be my first, having missing out for two years.

Here’s my badges of honor:

CSWE_MD_smallCSWP_MDsmall CSWP_Drawing_smallCSWP_Mold_small CSWP_Surfacing_small CSWP_Weldmentssmall

 

 

 

Even though I’ve earned my CSWE, I may still attempt the final advanced exam for Sheet Metal at some point, plus any new exams that may come out eventually.

The number of CSWE’s worldwide is still less than 1950 as of today (December 22, 2014), according to the Certificate Virtual Tester database.  Being a CSWE makes you stand out.  As an employee of SOLIDWORKS, it shows that I have a thorough understanding of how to use the software that I help design.  For users, it is a clear demonstration that you have excellent understanding of SOLIDWORKS and its various tools.

SolidWorks World 2014: Day 4 – Wednesday General Session – Product Definition

General Session

The General Session for Wednesday was as entertaining as ever.  Most the details from Wednesday General Session have already been well covered by other blogs and online outlets.  I’m going to focus on Bruce Holway’s presentation instead.  It is important to me because he’s describing the his group (Product Definition of which I am apart) and past years SolidWorks World Top Ten enhancements list.  He states that the vast majority of past year’s Top Ten have been implemented.  He covers many of recent examples.

  • Default to Concentric Mate when two selected faces are cylindrical
  • Default to Parallel Mate when two selected faces have other geometry that prevent coincident mating
  • Lock Option for Concentric Mates so that additional mates are not required to stop rotation of a cylindrical part
  • Slot Mate
  • Center of Mass reference geometry
  • Fix Edge Bleed Thru display, where thin walled features sometimes displayed fragments of obscured features
  • Don’t Delete Child Features, Dangle them Instead when deleting a parent feature
  • eDrawings for Android

Also mentioned is the fact that we visit hundreds of customers each year at their sites to understand how they are using SolidWorks.  This is extremely valuable in determining how we plan to improve our product offerings by giving us first hand experiences from our customers.

This year’s SolidWorks World Top Ten list:

  1. Auto-hide components
  2. Draw a line segment starting from the mid-point
  3. Equal spacing option for linear patterns
  4. Ability to rename a part or sub-assembly in the feature tree
  5. Unlimited undo/redo
  6. Pressing the ESC key should immediately stop the current calculation and return control to the user
  7. Fillets and chamfers should be managed by the same feature
  8. Ability to flip angle dimensions after they have been placed
  9. Hole callout should include all instances on the same face
  10. New Purge command